Short path distillation is often used for compounds which are unstable at high temperatures. It may also be used to purify and refine small amounts of material. We offer high quality short path systems, replacement parts, and complete turnkey kits that are ready for immediate use.
ADVANTAGES
The heating temperature can be considerably lower (at reduced pressure) than the boiling point of the liquid at standard pressure, making it easier to fraction the material. Because the distillate only has to travel a short distance before condensing, only a very minimal amount of material is lost on the sides of the apparatus. Each piece of glass is made of extra thick high borosilicate glass 3.3, which is corrosion resistant.
Product Description
Short Path Distillation Systems
Clear2 short path distillation kit features
- Newly re-designed distillation head with larger vacuum jacket for less heat loss during distillation, increased internal diameter for more efficient fractioning and condensation of vapor with zero clogging.
- PTFE 24/40 thermo inlet adapters with Viton gaskets
- Ai Heavy wall glassware for durability
- Vacuum jacketed vapor channel
- Thermo port on distillation head: 24/40 joint
- Thermo port on boiling flask: 24/20 joint
- Boiling flask to distillation head: 34/45 joint
- Recirculating fluid and vacuum connectors: GL-16 adapter and 3/8" hose barb
- Glass material: high borosilicate glass 3.3
- Shipping dimension and weight: 27 x 22 x 9 inches, 14 lbs.
Warranty: Glassware does not have warranties. Glassware may have minute blemishes that will not affect the function. If you believe there are imperfections on your glassware, please contact us. We check all our inventory and make sure no defective glassware is sent to our customers.
Part description |
Quantity |
Ai heavy wall, vacuum jacketed, distillation head with multiple sets of vigreux, cooling channel, and a temperature probe port |
1 pc |
Ai heavy wall round bottom 2-neck flask with one 34/45 vertical center neck and one 24/40 angled side neck |
1 pc |
PTFE 24/40 joint thermometer inlet adapter with Viton gasket |
2 pcs |
Ai 24/40 PennyHead glass stopper |
1 pc |
Ai 24/40 joint, round-top glass feeding funnel |
1 pc |
Ai 250mL distribution adapter with one 24/40 receiving flask connector and one 3/8" vacuum port |
1 pc |
Ai 250mL distribution adapter with three 24/40 receiving flask connectors and one 3/8" vacuum port (can be swapped with a single cow) |
1 pc |
Ai 24/40 joint, heavy wall 500mL round bottom receiving flask |
2 pcs |
Ai 24/40 joint, heavy wall 250mL round bottom receiving flask |
1 pc |
Ai glass 3/8" hose barb tee adapter |
1 pc |
24/40 joint x 1, 34/45 joint x 1, stainless steel keck clip |
2 pcs |
24/40 joint, plastic keck clip |
3 pcs |
Cork ring stand (2L x 1, 500mL x 1) |
2 pcs |
4 x 4" stainless steel lab jack (min. height 1.75", max height 6") |
1 pc |
Dow Corning high vacuum grease 5.3 oz |
1 pc |
Traceable Kangaroo digital thermometer |
1 pc |