Product Description
NEW EdwardsE2M28 PFPE 200-220/380-415 V, 3-ph, 50 Hz or 200-230/460 V, 3-ph, 60 Hz IE2
Click Here For User Manual
Click Here for Parts Manual
1 year mfg warranty.
The EM range of oil-sealed rotary pumps - renowned for its high ultimate vacuum, rapid pumping speed, quiet operation and ability to handle vapour - has become the industry standard laboratory and light industrialapplications.
The E2M28 pump is a two-stage, direct drive, sliding vane pump. The pump is oil sealed and designed for reliable, long-term operation in both laboratory and industrial environments. The pump is a freestanding unit with the drive provided through a flexible coupling by either a single-phase or three-phase (four-pole) motor.
Supplied with: Ultragrade 19 oil, NW25 exhaust flanges rather than the Nozzle that is supplied as standard with hydrocarbon pumps.
Fomblin® must be purchased separately for PFPE pumps.
Technical Data
| Displacement (swept volume) 50 Hz | 32.2m3h-1 / 19 ft3min-1 |
| Displacement (swept volume) 60 Hz | 38.9 m3h-1 / 22.3 ft3min-1 |
| Speed (Pneurop 6602) 50 Hz | 27.5 m3h-1 / 16.2 ft3min-1 |
| Speed (Pneurop 6602) 60Hz | 33.0 m3h-1 / 19.5 ft3min-1 |
| Ultimate vacuum (total pressure) | |
| without gas ballast | 1 x 10-3 mbar / 7.5 x 10-4 Torr |
| with gas ballast | 1.5 x 10-2 mbar / 1.1 x 10-2 Torr |
| Inlet connection | NW25 flange |
| Outlet connection | Nozzle 15 mm external Ø removable from 3/4 in BSP tapped hole |
| Max allowed pressure at outlet | 0.5 bar gauge / 7 psig |
| Max inlet pressure for water vapour | 30 mbar / 23 Torr |
| Max water vapour pumping rate | 0.7 kg h-1 |
| Operating temperature range | 13 – 40 °C |
| Nominal rotation speed | 1440 / 1720 rpm |
| Motor power 50 Hz | 0.75 kW |
| Motor power 60 Hz | 0.90 kW |
| Power Connector 1-ph* | IEC EN60320 C19 |
| Weight | 44 kg / 97 lbs |
| Noise | 57 dB(A) @ 50 Hz |
| Oil capacity - max | 1.5 litre |
| Oil capacity - min | 1.2 litre |
| Recommended oil (supplied) | Ultragrade 19 |
* Pumps listed with IEC connector only
Technology
The motor is totally enclosed and is cooled by the motor-cooling fan which directs air along the motor fins. The motors are fitted with a thermal overload device. When the motor is too hot, the thermal overload device switches off the pump. The thermal overload device has an automatic reset; when the motor cools down, the device resets and the motor will restart.An oil pressure system lubricates the pump shaft bearing surfaces and rotor sealing faces. The pump has an oil distribution valve which prevents discharge of oil to the pump interior (suckback) after the pump stops. The pumping chambers are air-tight, so this arrangement prevents oil suckback unless the gas ballast valve is open.You can inspect the level and condition of oil in the oil box reservoir through the oil sight-glass. An oil filler-plug is fitted to the top of the oil box. The pump has two oil drain-plugs to allow either gravity oil drain or pressure oil drain.
Features and Benefits
-
The pump is designed for reliable, long-term operation.
-
Thermal overload device prevents overheating (single phase only).
-
The pump is a free-standing unit.
-
The drive is provided through a flexible coupling by a single-phase or three-phase (four pole) motor.
-
The motors are totally enclosed and are cooled by the motor-cooling fan.
-
Easy to use controls.
-
Pressure die cast oil box with integral oil seals prevents oil leaks.
-
Gas ballast valve for large water vapour handling capacity.
-
Externally approved to EN61010, CSA, C22.2 and UL61010.
-
Oil distribution valve.
-
Pumping chambers are air-tight.
-
Oil sight-glass, two oil drain-plugs, inlet-port and outlet nozzle all fitted as standard.
-
Gas-ballast control.
Applications
-
Analytical instruments - LCMS
-
Automotive
-
Beam lines and high energy physics
-
Centrifuges, ultra-high speed
-
Coating
-
Cryogenics
-
Degassing/curing - oil, epoxy resin
-
Distillation/extraction/filtration
-
Freeze drying
-
Furnaces
-
Gas bottle filling/emptying
-
Gel drying
-
Glove boxes, ovens
-
Laboratory bench top vacuum
-
Lasers, gas recovery and re-circulation
-
Leak detectors, Helium
-
Load locks and transfer chamber
-
Refrigeration manufacture
-
Rotary, centrifugal evaporators
-
Solvent recovery
-
Surface science instruments
-
Turbomolecular backing pumps
**Photos are for reference only. Actual product may have slight differences.
