Product Description
Leybold D25B pump.
Reconditioned
Complete with Pump, and Motor. 230v 1.5 HP motor.20.9 CFM.
Other configurations available upon request.
1 year warranty.
Oil Sealed Vacuum Pumps
Oil sealed rotary vane vacuum pumps are being used in all areas of vacuum engineering. They are equally suited for both industrial production and research applications. They may be used to generate a rough and medium vacuum or as backing pumps in pump combinations with Roots vacuum pumps or high vacuum pumps. Rotary vane pumps are built as one- or two stage pumps. The ultimate pressure range is depending on the model between 0.5 mbar and 5x10-5mbar. The comprehensive pumping speeds ranging from 1.5 m3/h up to 13000 m3/h
Typical applications:
- Freeze Drying
- Vacuum Coating
- Chemistry
- Pharmaceuticals
- R&D
- Backing Pump
- Vacuum Drying
- Degassing
- Concentrating
- Vacuum Distillations
- Vacuum Manifold/Schlenk Line
Inlet connection: | DN 25 ISO‐KF | |
Outlet connection: | DN 25 ISO‐KF | |
Nominal pumping speed at 50 Hz: | 29.5 m3/h | 17.4 cfm |
Nominal pumping speed at 60 Hz: | 35.4 m3/h | 20.9 cfm |
Pumping speed at 50 Hz: | 25.7 m3/h | 15.1 cfm |
Pumping speed at 60 Hz: | 30.8 m3/h | 18.2 cfm Ultimate partial pressure without gas ballast: |
Water vapor tolerance at 60 Hz: | 25.0 mbar | 18.8 Torr |
Water vapor capacity at 50 Hz: | 476 g/h | |
Water vapor capacity at 60 Hz: | 476 g/h | |
Operating fluid: | LEYBONOL LVO 100 | |
Operating fluid capacity | ||
min.: | 0.6 l | 0.6 qt |
max.: | 1.4 l | 1.5 qt |
Noise level to DIN 45 635 | ||
without gas ballast: | 54 db(A) | |
with gas ballast: | 56 db(A) | |
Mains connection: | 1‐ph, 230 V, 50/60 Hz | |
Motor rating: | 750 W | 1.0 HP |
Rotation speed at 50 Hz: | 1.500 min‐1 | 1.500 rpm |
Rotation speed at 60 Hz: | 1.800 min ‐1 | 1.800 rpm |
Motor protection rating: | IP 54 | |
Admissible ambient temperature: | +12 to +40°C | +54 to +104°F |
Dimensions: | see dimension sheet | |
Weight: | 32.0 kg | 70.6 lbs |
- Each pump is fully disassembled and all parts are cleaned and decontaminated with our multi-step process to ensure all contaminants are removed.
- All parts are inspected for wear and replaced as necessary.
- Damaged or worn parts are replaced.
- All O-rings, seals, springs, and gaskets replaced.
- Motor tested.
- Assembled and tested with multiple flushes of new oil.