Product Description
XDS35i - NGB 100-120/200-230V 50/60Hz 1Ph
Specifications
| Connection Vacuum Inlet Flange | DN 40 ISO-KF (NW40) |
| Connection vacuum outlet flange | DN 25 ISO-KF (NW25) |
| Cooling Method | Air Cooling (forced - fan) |
| Pressure Ultimate | 7.5 mtorr |
| Supply Voltage | 1Ph 100-120/200-230V 50/60Hz |
| Power Total Rated | 520.00 W |
XDS35i - NGB 100-120/200-230V 50/60Hz 1Ph
The XDS35i NGB version is equipped with a blanked gas ballast port and therefore is well suited for rare gas recirculation and gas recovery applications.
Features and Benefits
- Bearing shield - ensures separation between process gases and bearing lubrication to ensure a clean vacuum and no possibility of contamination to lubrication from process gases, which prolongs bearing life.
- Smart motor drive - means consistent performance globally, pump overload protection and remote start/stop capability.
- High flow gas ballast feature - allows pumping of vapours including water vapour at up to 240 gh-1.
- Simple single-sided scroll design - allows maintenance to be done in minutes for low cost of ownership and maximum up-time.
- Take another step - the Enhanced versions offer up to 20% lower peak power requirements during initial pump down which means it has the ability to pump down large volume chambers with no loss of performance and has up to 25% more pumping speed at these roughing pressures which helps on higher frequency cycling applications as well.
