Product Description

NEW Edwards RV12 Vacuum Pump

1-phase 115/230v. 8.4 CFM Rotary Vane Pump

Click Here for Manual

A65501906

Edwards RV12 Overview

The Edwards RV12 vacuum pump is a very versatile pump that can handle many different applications. These are great for lab and ubiversity use.

Edwards RV12 pumps have become the industry standard for scientific primary pumping applications. RV pumps are uniquely capable of delivering high or low throughputs with high ultimate vacuum. This, combined with ultra-low noise levels, makes them ideal for a wide range of applications including GCMS and other small bench top type applications.

Edwards RV12 Technical Data

Displacement
50Hz	14.2 m³h^-1 / 8.4 ft³min^-1
60Hz	17 m³h^-1 / 10 ft³min^-1
Speed (Pneurop 6602)
50Hz	12 m³h^-1 / 7.1 ft³min^-1
60Hz	14.2 m³h^-1 / 8.4 ft³min^-1
Ultimate pressure	2 x 10^-3 mbar / 1.5 x 10^-3 Torr
Ultimate pressure GB I	3 x 10^-2 mbar / 2.3 x 10^-2 Torr
Ultimate pressure GB II	6 x 10^-2 mbar / 4.6 x 10^-2Torr
Ultimate pressure with Fomblin®	2 x 10^-2 mbar / 1.5 x 10^-2 Torr
Max inlet pressure for water vapour	32 mbar / 24 Torr
Max water vapour pumping rate – GB I	60 gh^-1
Max water vapour pumping rate – GB II	220 gh^-1
Max allowed outlet pressure	1 bar gauge / 14 psig
Max allowed inlet and gas ballast pressure	0.5 bar gauge / 7 psig
Motor power 50/60Hz	450 / 550W
Power connector 1-ph	IEC EN60320 C13
Nominal rotation speed 50/60Hz	1500 / 1800rpm
Weight (without oil)	29 kg / 63.8 lb
Oil capacity min/max	0.65 / 1 litres
Recommended oil	Ultragrade 19
Inlet flange	NW25
Exhaust flange	NW25
Noise level	48 dB(A) @ 50 Hz
Operating temperature range	12 – 40 °C

Edwards RV12 Technology

All our RV12 pumps are significantly quieter noise levels of 48 dBA 50Hz are typically half the noise of a conventional pump and have been achieved by extensive work on the drive train and motor.The pumps have the unique ability to deliver excellent ultimate vacuum in both high vacuum and high throughput modes with or without gas ballast. This gives the user an unrivalled opportunity to select the optimum pumping performance without compromising the application.In its high vacuum mode, the RV pump is ideal for analytical instruments, electron microscopes, physics research, backing turbo pumps, TV tube pumping and leak detection applications. Configure the same pump in the high throughput mode, and it becomes suitable for mass spectrometer inlet systems, distillation, laboratory furnaces, backing vapor pumps, solvent concentration, freeze drying and other drying applications.The simple to use mode selector and accessible, three-position gas ballast control allow the pump to be reconfigured at any time, even when the pump is running.

Features and Benefits of the Edwards RV12 Pump

48 dBA and intrusive frequencies minimised.

Dual mode. Suitable for high throughput and high vacuum applications.

Easy-to-use gas ballast.

Fast acting inlet valve for system protection.

High torque, dual voltage/dual frequency motor, electronic start relay.

Efficient high pressure lubrication.

Oil-tight with printed gaskets, effective shaft seals.

Clamped-in sight glass.

Oil box well contains filling spills.

Hi-tech polymer blades, large diameter, easy-clean oil passages.

Consistent, built-in quality, cast bar construction.

Applications for Edwards RV12 Vacuum Pump

Analytical instruments

Centrifuges, ultra-high speed

Coating

Degassing/curing - oil, epoxy resin

Distillation/extraction/filtration

Freeze drying

Furnaces

Gas bottle filling/emptying

Gel drying

Glove boxes, ovens

Laboratory bench top vacuum

Leak detectors, Helium

Load locks and transfer chambers

Refrigeration manufacture

Research and development

Rotary, centirfugal evaporators

Scanning electron microscopes - SEM

SEM/FIB (ion beam repair)

Solvent recovery

Surface science instruments

Turbomolecuar backing pumps

**Photos are for reference only. Actual product may have slight differences.

Product Videos

Custom Field

Product Reviews

Write a Review

Edwards RV12 Vacuum Pump-NEW