Product Description
mXDS3 Scroll Pump - 115V 1Ph 50/60Hz
Shop Now for A74401906 mXDS3 Scroll Pump!
*always check availability before ordering.
mXDS Scroll Pumps
Edwards is extending our small dry pump portfolio. mXDS3 continues our scroll pump experience filling the performance gap and giving more choice to System builders and OEMs. A small dry alternative to oil sealed rotary vane pumps and diaphragm pumps of a similar capacity. mXDS3 are offered as standard or configured with an inlet valve accessory and exhaust silencer/filter to become the mXDS3s.
Great compact 1.77cfm pump to get you to 75mtorr.
No oil!
mXDS3 - 115V 1Ph 50/60Hz
This standard variant of the mXDS3 comes with a single phase 115V 50/60 Hz motor.
Features and Benefits
- Flexibility - The compact and lightweight mXDS3 weighs in at just 7.8 kg and comes with a purpose-made carry handle making it highly portable. For system builders, the pump can typically be mounted horizontally or vertically and for convenient connection, the inlet can be orientated vertically or horizontally with a push-fit alternative available as an accessory.
- Performance - Edwards mXDS3 and mXDS3s dry scroll pumps deliver 3 m3/h peak speed and 0.1 mbar ultimate. The pumping speed and good ultimate vacuum make these pumps well suited for backing turbomolecular pumps. These small scroll pumps have a gas ballast facility incorporated in the design as standard for water vapour handling and an exhaust valve just like the larger nXDS.
- Environment - Edwards mXDS3 and mXDS3s are clean oil-free pumps with no oil to top up, replace or dispose of. They typically have a lower power requirement compared to similar capacity pumps making them great for energy savings, an ideal choice for helping to reduce your carbon footprint. The optimised fan cooling is beneficial in reducing noise for quieter operation and a pleasant working environment.
General Product Information
| Dimension Length | 0.223 |
| Connection Vacuum Inlet Flange | DN 16 ISO-KF (NW16) |
| Noise Level | 54.00 db(A) |
| Supply Frequency | 50 Hz 60 Hz |
| Weight | 7.80 |
| Power Supply Phase | 1-Ph |
| Dimension Height | 0.231 |
| Cooling Method | Air Cooling (forced - fan) |
| Connection vacuum outlet flange | 1/8" BSPP (G) Female 6x8mm hose pushfit |
| Dimension Width | 0.158 |
| Supply Voltage | 1Ph 115V 50/60Hz |
| IP Rating | IP20 |
| Connection Power | IEC EN60320 C14 - Male (for C13 plug on mains cable) |
| Leak Rate | 1.000 × 10⁻⁵ |
| dimensionsCombinedLengthWidthHeight | 0.223 0.223 0.223 |
Performance Data
| Pumping Speed @50Hz Nominal | 8.333 × 10⁻⁴ |
| Power Total Rated | 120.00 |
| Pumping Speed Nominal | 8.333 × 10⁻⁴ |
| Pressure Ultimate | 10.00 |
| Power at Ultimate (Quiescent) | 180.00 |
| Pumping Speed @60Hz Nominal | 9.722 × 10⁻⁴ |
| Power at Atmosphere | 250.00 |
| Power at Atmosphere Short Term Max | 250.00 |
| pressureUltimateWithGasBallast | 15.00 |
| powerAtUltimateWithGb | 200.00 |
Environmental Conditions
| Temperature Ambient Operation Min. | 5.00 |
| temperatureAmbientOperationMax | 40.00 |
| Temperature Ambient Storage Min. | 70.00 |
| Temperature Ambient Storage Max. | -30.00 |
Material of Construction
| Material Of Construction | Anodised Aluminium, aluminium, engineering polymer inlet, stainless steel push-in adaptor, PTFE composite tip seals, stainless steel, fluoroelastomer seals plus steel, copper, hydrocarbon lubricant and chemically resistant polymers |
| Material Exposed To Vacuum | Anodised Aluminium, aluminium, engineering polymer inlet, stainless steel push-in adaptor, PTFE composite tip seals, stainless steel, fluoroelastomer seals |
Operation Conditions - Limitations
| Pressure Inlet Continous Max. | 1.000 × 10⁵ |
| Pressure Outlet Continous Max. | 1.500 × 10⁵ |
| Altitude Max. | 2000.00 |
Classification
| High / Medium / Rough Vacuum Classification | Medium Rough Vacuum Pump |
| Dry or Wet Pump | Dry pump |
| Vacuum Pump Technology | Dry Scroll Pump |
| Product Pressure Range | Medium Vacuum - 1 mbar - 1*10-3 mbar |
