Product Description
Used Edwards E2M175 Vacuum Pump with EMF300 filter and Stand
Over $20,000 if purchased new.
Technical Data
| Displacement | |
| 50Hz | 178 m3h-1 / 105 ft3min-1 |
| 60Hz | 214 m3h-1 / 126 ft3min-1 |
| Speed (Pneurop) | |
| 50Hz | 160 m3h-1 / 94 ft3min-1 |
| 60Hz | 196 m3h-1 / 115 ft3min-1 |
| Number of stages | 2 |
| Ultimate vacuum | |
| Without gas ballast (total pressure) | 1 x 10-3 mbar / 7.7 x 10-4 Torr |
| With gas ballast (partial pressure) | 5 x 10-3 mbar / 3.8 x 10-3 Torr |
| Ultimate with Fomblin® | |
| Without gas ballast | 1 x 10-2 mbar / 7.7 x 10-3 Torr |
| Inlet connection | ISO63 blank flange with seal |
| Outlet connection | ISO40 flange centre tapped |
| Max outlet pressure | 0.5 bar gauge |
| Max inlet pressure for water vapor | 20 mbar / 15 Torr |
| Max water vapor pumping rate | 2.4 kg h-1 |
| Weight | 204 kg / 449 lb |
| Motor protection rating | IP55 |
| Motor power | |
| 50Hz | 5.5 kW / 7.5 hp |
| 60Hz | 6.5 kW / 8.5 hp |
| Standard oil capacity | |
| maximum | 25 litre |
| minimum | 16 litre |
| PFPE oil capacity | |
| maximum | 18 litre |
| minimum | 6.5 litre |
| Recommended oil | Ultragrade 70 |
| PFPE prepared version | Fomblin® Y06/6 |
| Noise level | 75 dB (A) |
| Water cooling requirement | 1.3 lmin-1 |
As is. Non-returnable
